Meridian G Series Guide d'installation télécharger pdf (Page 21)

Troubleshooting

Maintenance

Cleaning

To clean the case, display panel, and keypad

• Disconnect the power cord before cleaning the unit.

The exterior surfaces of Meridian G Series products are made from

solid anodised aluminium, powder coated steel, thermoplastic

rubber, and glass.

They are designed to be easily wiped clean with a dry, lint free

cloth. Greasy marks should be removed by light rubbing with a

slightly damp cloth and a trace of proprietary glass cleaner. Do

not use any other solvent or abrasive based cleaners. Dust can be

removed from the disc drive tray with a small dry brush when the

drawer is open.

Ensure that no liquid enters the casework and that the product is

completely dry before re-connection.

To clean the audio connections

The audio sockets on the back of the product are gold plated and

do not need to be cleaned if gold-plated plugs are used. Otherwise,

it is recommended that you unplug and reconnect the plugs at

least once a year. A proprietary contact cleaner can be used to

some advantage.

To change the mains fuse

• Remove the mains connector, and pull out the drawer above the

power input to access the fuse.

Before replacing a blown fuse, it is best to ascertain the cause of

the failure.

The fuse drawer includes a spare fuse. This should be replaced by a

fuse of the same rating.

G Series CD Player 17 12/9/03, 2:26:51 pm

1 2 ... 16 17 18 19 20 21 22 23 24

Pas de commentaire

Meridian G Series Guide d'installation Page 21